Let's get your mountain data flowing.
Follow these steps the first time you connect your sign to your hotel's Wi-Fi network.
Connect to power, tun on, and watch the status LED on the side of the unit:
Fast Blinking: The device is searching for known networks. Please wait for ~60 seconds for the blinking pattern to change to.....
Heartbeat (Double Blink): The Setup Hotspot is now active. You may proceed to Step 2.
On your phone or laptop, open your Wi-Fi settings and join the setup wifi network:
A "Captive Portal" window should pop up automatically. If it doesn't, open your browser and go to:
Select your hotel's wifi SSID, enter your password, and click Authorize Connection.
iPhone Users: If when you start to enter your hotel wifi password you get a pop up prompt to "Use Stong Password", click the X to close the pop up prompt (NOT the 'Captive Wi-Fi' window) & proceed to enter your hotel's wifi password.
http://172.29.1.1 in your browser once connected to the temporary 'Ski_Lift_Sign_Setup_....' wifi network.